Skip to content
May 1, 2008 / ranacse05

mod re_write Example

Few days ago i was thinking how can i rewrite the url ? Then i ask phpxperts and they replay me that mod re_write can do that work.Then i was looking for some mod re_write example.And got a nice one.Here it is I’m shearing with u all.

so, what is mod_rewrite for?

Simply, mod_rewrite is used for rewriting a URL at the server level, giving the user output for that final page. So, for example, a user may ask for, but will really be given by the server. Of course, the user will be none the wiser to this little bit of chicanery. .

What do I need to get mod_rewrite working?

There’s pretty much only one thing you’ll need to get mod_rewrite working for you, and that’s to have the mod_rewrite module installed on your Apache server!

For the purpose of this article, I’m going to assume that you don’t have access to view or edit the Apache server httpd.conf file, so the easiest way to check whether the mod_rewrite module is installed will be to look on your phpinfo page. If you’ve not already created one of these for yourself, just copy and paste the following code into an new text file using your favourite text editor, save it as phpinfo.php, and upload it to your server:

<?php phpinfo(); ?>

Load that page up in your web browser, and perform a search for “mod_rewrite”. All being well, you’ll find it in the “Apache loaded modules” section of the page. If it isn’t there, you’ll have to contact your hosting company and politely ask them to add it to the Apache configuration.

Assuming the mod_rewrite module is loaded, then you’re good to go!

A simple mod_rewrite example

So, let’s write a simple mod_rewrite example. This isn’t going to be anything fancy; we’re just going to redirect people who ask for alice.html to the page bob.html instead. First, let’s create the Alice and Bob pages. Below is Alice’s webpage – create a similar one for Bob.

      <title>Alice's webpage</title>
         This is Alice's webpage

Upload both of these to your web server, and check that you can view both of them. Now comes the fun – we’re going to add a couple of lines to your .htaccess file. The .htaccess file is a text file which contains Apache directives. Any directives which you place in it will apply to the directory which the .htaccess file sits in, and any below it. To ours, we’re going to add the following:

RewriteEngine on
RewriteRule ^alice.html$ bob.html

Upload this .htaccess file to the same directory as alice.html and bob.html, and reload Alice’s page. You should see Bob’s page being displayed, but Alice’s URL. If you still see Alice’s page being displayed, then check you’ve followed the instructions correctly (you may have to clear your cache). If things still aren’t working for you, then contact your technical support people and ask them to enable mod_rewrite and the FileInfo override in their httpd.conf file for you

The structure of a RewriteRule

RewriteRule Pattern Substitution [OptionalFlags]

The general structure of a RewriteRule is fairly simple if you already understand regular expressions. This article isn’t intended to be a tutorial about regular expressions though – there are already plenty of those available. RewriteRules are broken up as follows:


This is just the name of the command.


A regular expression which will be applied to the “current” URL. If any RewriteRules have already been performed on the requested URL, then that changed URL will be the current URL.


Substitution occurs in the same way as it does in Perl, PHP, etc.

You can include backreferences and server variable names (%{VARNAME}) in the substitution. Backreferences to this RewriteRule should be written as $N, whereas backreferences to the previous RewriteCond should be written as %N.

A special substitution is -. This substitution tells Apache to not perform any substitution. I personally find that this is useful when using the F or G flags (see below), but there are other uses as well.


This is the only part of the RewriteRule which isn’t mandatory. Any flags which you use should be surrounded in square brackets, and comma separated. The flags which I find to be most useful are:

· F – Forbidden. The user will receive a 403 error.

· L – Last Rule. No more rules will be proccessed if this one was successful.

· R[=code] – Redirect. The user’s web browser will be visibly redirected to the substituted URL. If you use this flag, you must prefix the substitution with, thus making it into a true URL. If no code is given, then a HTTP reponse of 302 (temporarily moved) is sent.

A full list of flags is given in the Apache mod_rewrite manual.

A slightly more complicated mod_rewrite example

Let’s try a slightly more meaty example now. Suppose you have a web page which takes a parameter. This parameter tells the page how to be displayed, and what content to pull into it. Humans don’t tend to like remembering the additional syntax of query strings for URLs, and neither do search engines. Both sets of people seem to much prefer a straight URL, with no extra bits tacked onto the end.

In our example, you’ve created a main index page with takes a page parameter. So, a link like index.php?page=software would take you to a software page, while a link to index.php?page=interests would take you to an interests page. What we’ll do with mod_rewrite is to silently redirect users from page/software/ to index.php?page=software etc.

The following is what needs to go into your .htaccess file to accomplish that:

RewriteEngine on
RewriteRule ^page/([^/\.]+)/?$ index.php?page=$1 [L]

Let’s walk through that RewriteRule, and work out exactly what’s going on:


Sees whether the requested page starts with page/. If it doesn’t, this rule will be ignored.


Here, the enclosing brackets signify that anything that is matched will be remembered by the RewriteRule. Inside the brackets, it says “I’d like one or more characters that aren’t a forward slash or a period, please”. Whatever is found here will be captured and remembered.


Makes sure that the only thing that is found after what was just matched is a possible forward slash, and nothing else. If anything else is found, then this RewriteRule will be ignored.


The actual page which will be loaded by Apache. $1 is magically replaced with the text which was captured previously.


Tells Apache to not process any more RewriteRules if this one was successful.

Let’s write a quick page to test that this is working. The following test script will simply echo the name of the page you asked for to the screen, so that you can check that the RewriteRule is working.

      <title>Second mod_rewrite example</title>
         The requested page was:
         <?php echo $_GET['page']; ?>

RewriteEngine onRewriteCond %{HTTP_REFERER} !^$RewriteCond %{HTTP_REFERER} !^http://(www\.)?*$ [NC]RewriteRule \.(gif|jpg|png)$ [R,L]


Again, upload both the index.php page, and the .htaccess file to the same directory. Then, test it! If you put the page in, then try requesting The URL in your browser window will show the name of the page which you requested, but the content of the page will be created by the index.php script! This technique can obviously be extended to pass multiple query strings to a page – all you’re limited by is your imagination.

Conditional Statements and mod_rewrite

But what happens when you start getting people hotlinking to your images (or other files)? Hot linking is the act of including an image, media file, etc from someone else’s server in one of your own pages as if it were your own. Obviously, as a webmaster, there are plenty of times when you don’t want people doing that. You’ll almost certainly have seen examples where someone has linked to one image on a website, only for a completely different, “nasty” one to be shown instead. So, how is this done?

It’s pretty simple really. All it takes are a couple of RewriteCond statements in your .htaccess file.

RewriteCond statements are as they sound – conditional statements for RewriteRules. The basic format for a RewriteCond is RewriteCond test_string cond_pattern. For our purpose, we will set the test_string to be the HTTP_REFERER. If the test string is neither empty nor our own server, then we will serve an alternative (low bandwidth) image, which tells the person who is hotlinking off for stealing our bandwidth.

Here’s how we do that:

Here, the RewriteRule will only be performed if all the preceeding RewriteConds are fulfilled. In the second RewriteCond, [NC] simply means “No Case”, so it doesn’t matter whether the domain name was written in upper case, lower case or a mixture of the two. So, any requests for gif, jpg or png files from referers other than will result in your “nasty” image being shown instead.

The [R,L] in the RewriteRule simply means “Redirect, Last”. So, the RewriteRule will visibly redirect output to “nasty.gif” and no more RewriteRules will be performed on this URL.

If you simply don’t want the hot linkers to see any image at all when they hot link to your images, then simply change the final line to RewriteRule \.(gif|jpg|png)$ - [F]. The - means “don’t rewrite the requested URL”, and the [F] means “Forbidden”. So, the hot linker will get a “403 Forbidden message”, and you don’t end up wasting your bandwidth.

Note : This is the original link .



Leave a Comment
  1. Alexwebmaster / Mar 3 2009 11:02 am

    Hello webmaster
    I would like to share with you a link to your site
    write me here

  2. Antony / Jan 17 2014 6:00 pm

    This is really interesting, You are a very skilled blogger.
    I have joined your feed and look forward to seeking more of your great
    post. Also, I have shared your website in my social

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s

%d bloggers like this: